Papers in Refereed Journals

Upcoming publications   |   2009   |  2008   |   2007   |   2006   |   2001-2005   |   1996-2000   |   1993-1995

Upcoming publications

[C107] I.-S. Park, S.-M. Kim, D. Pugal, L. Huang, S.-W. Tam-Chang, and K. J. Kim, “Visualization of the Cation Migration in Ionic Polymer-Metal Composite Under an Electric Field,” (manuscript in preparation).

[C106] S. Kim, K. J. Kim, and J. M. Kennedy, “A Model of Superhydrophobic Surface Treatment Suitable for Dropwide Condensers,” (manuscript in preparation).

[J105] S.-M. Kim, I.-S. Park, and K. J. Kim, “A Microscopic Model Developed for Ionic Polymer-Metal Composites with Porous Layered Electrodes,” (under review).

[J104] Y. Wang, F. Yang, X. Meng, Q. Guo, Z. Zhang, I.-S. Park, S. W. Kim, and K. J. Kim, “Simulation Study on the Reaction Process Based Single Stage Metal Hydride Thermal Compressor,” International Journal of Hydrogen Energy (accepted for publication).

[J103] A. Vanderhoff and K. J. Kim, “Experimental Study of a Metal Hydride Driven Braided Artificial Pneumatic Muscle (BAPM),” Smart Materials and Structures (accepted for publication).

[J102] Y.-D. Jun, K. J. Kim, and J. M. Kennedy, “Dynamic Surface Tension of Heat Transfer Additives Suitable for Use in Steam Condensers and Absorbers,” International Journal of Refrigeration (accepted for publication).

2009

[J101] D. Pugal, K. Jung, A. Aabloo, and K. J. Kim, “IPMC Mechanoelectrical Transduction Review and Perspectives,” Polymer International (in print).

[J100] I.-S. Park, J.-K. Kim, K. J. Kim, J. Zhang, C. Park, and K. Gawlik, “Investigation of Coupled AB5 Type High-Power Metal Hydride Reactors,” International Journal of Hydrogen Energy, Vol. 34, pp. 5770-5777 (2009).

[J99] M. Lee, K. J. Kim, R. R. Hopkins, and K. Gawlik, “Thermal Conductivity Measurements of Copper-Coated Metal Hydrides (LANI5, CA0.6Mm0.4NI5, and LANI4.75AL0.25) for Use in Metal Hydride Hydrogen Compression Systems,” International Journal of Hydrogen Energy, Vol. 34, pp. 3185-3190 (2009).

2008

[J98] R. Tiwari, K. J. Kim, and S. Kim, "Ionic Polymer-Metal Composite as Smart Velocity Sensors and Energy Harvesters," Smart Structures & Systems, Vol. 4, No. 5, pp. 549-563 (2008).

[J97] K. M. Jung, K. J. Kim, and H. R. Choi, "A Novel Self-Sensing of Dielectric Elastomer Actuator," Sensors and Actuators: A Physical, Vol. 143, pp. 343-351 (2008).

[J96] I-S. Park, K. M. Jung, D. Kim, S.-M. Kim, and K. J. Kim, "Physical Principles of Ionic Polymer-Metal Composites as Electroactive Actuators and Sensors,” the MRS Bulletin, Vol. 33, pp. 190-195 (March 2008).

[J95] D. Pugal, K. J. Kim, A. Punning, H. Kasemägi, M. Kruusmaa, and A. Aabloo, "A Self-Oscillating Ionic Polymer-Metal Composite Bending Actuator," Journal of Applied Physics, Vol. 103, 084908 (2008).

[J94] S. M. Kim and K. J. Kim, "Palladium Buffer-Layered High Performance Ionic Polymer-Metal Composites Sensors and Actuators," Smart Materials and Structures, Vol. 143, pp. 343-351 (2008).

[J93] D. O. Kim, M. H. Lee, J. H. Lee, T.-W. Lee, K. J. Kim, Y. K. Lee, T. Kim, H. R. Choi, J. C. Koo, J.-D. Nam, Transparent flexible conductor of poly(methyl methacrylate) containing highly-dispersed multiwalled carbon nanotube, Organic Electronics, Vol. 9, pp. 1-13 (2008).

2007

[J91] S. J. Kim, S.-M. Kim, K. J. Kim, and Y. H. Kim, "An Electrode Model for Ionic Polymer-Metal Composites," Smart Materials and Structures, Vol. 16, pp. 2286-2295 (2007)

[J90] D. Kim and K. J. Kim, "A Theoretical and Experiment Study for Self-oscillatory Ionic Polymer-Metal Composite Actuators," Smart Materials and Structures, Vol. 16, pp. 1789-1795 (2007).

[J89] I.-S. Park, J. Lee, K. J. Kim, J.-D. Nam, and W. Yim, "Mechanical and Dielectric Properties of the Silicone Elastomer with Multi-Walled Carbon Nanotubes as a Nanofiller," Polymer Engineering and Science, Vol. 47, pp. 1396-1405 (2007).

[J88] I.-S. Park, S.-M. Kim, and K. J. Kim, "Mechanical and Thermal Behavior of Ionic Polymer-Metal Composites: Effects of Electrode Metals," Smart Materials and Structures, Vol. 16, pp. 1090-1097 ( 2007).

[J87] D. Kim, K. J. Kim, Y. Tak, D. Pugal and I.-S. Park, "A Self-Oscillating Electroactive Polymer," Applied Physics Letter, Vol. 90, pp. 184104(1-3) (2007)..

[J86] D. Kim and K. J. Kim, "Ionic Polymer-Metal Composite Actuators Exhibiting Self-Oscillation," Sensors and Actuators A, Vol. 137, pp. 129-133 (2007).

[J85] W. S. Yim, J. Lee, and K. J. Kim, "An Artificial Muscle Actuator for Biomimetic Underwater Propulsors," Bioinspiration & Biomimetics, Vol. 2, pp. S31-S41 (2007).

[J84] S. Lee,  K. J. Kim, and I.-S. Park, "Modeling and Experiment of Muscle-like Linear Actuator Using an Ionic Polymer-Metal Composite and its Actuation Characteristics," Smart Materials and Structures, Vol. 16, pp. 583-588 (2007). 

[J83] I.-S. Park and K. J. Kim, "Multi-Fields Responsive Ionic Polymer-Metal Composite," Sensors and Actuators: A, Vol. 135, pp. 220-228 (2007).

[J82] D. Dogruer, J. Lee, W. Yim, K. J. Kim, and D. Kim, "Fluid Interaction of Segmented Ionic Polymer-Metal Composites under Water," Smart Materials and Structures, Vol. 16, pp. S220-S226 (2007).

[J81] G. Lloyd and K. J. Kim, "Smart Metal Hydride Actuators," International Journal of Hydrogen Energy, Vol. 32, pp. 247-255 (2007).

[J80] K. J. Kim, W. Yim, J. W. Paquette, and D. Kim, "Ionic Polymer-Metal Composites for Underwater Operation," Journal of Intelligent Materials Systems and Structures (JIMSS), Vol. 18, pp. 123-131 (2007).

[J79] D. Y. Lee, I.-S. Park, M.-H. Lee, K. J. Kim, and S Heo, "Ionic Polymer-Metal Composite Bending Actuator Loaded with Multi-Walled Carbon Nanotubes," Sensors and Actuators A: Physical , Vol. 133, pp. 117-127 (2007).

2006

[J78] R. Samatham, I-S. Park,  K. J. Kim, J.-D. Nam, N. Whisman, and J. Adams, "Electrospun Nanoscale Polyacrylonitrile Artificial Muscle," Smart Materials and Structures, Vol. 15, N152-155 (2006).

[J77] K. Choe, K. J. Kim, D. Kim, C. Manford, S. Heo, and M. Shahinpoor, "Performance Characterization of Electro-Chemically Driven Polyacrylonitrile Fiber Bundle Actuator," Journal of Intelligent Materials Systems and Structures (JIMSS), Vol. 17, pp. 563-576 (2006).

[J76] R. Samatham and K. J. Kim, "Electric Current as a Control Variable in the Electrospinning Process," Polymer Engineering and Science, Vol. 46, No. 7, pp 954-959 (2006).

[J75] S. Vemuri, K. J. Kim, and Y. T. Kang, "A Study on Effective use of Heat Transfer Additives in the Process of Steam Condensation" International Journal of Refrigeration, Vol. 29, pp. 724-734 (2006).

[J74] S. Lee and K. J. Kim, "Design of IPMC Actuator-driven Valve-less Micropump and Its Flow Rate Estimation at Low Reynolds Numbers," Smart Materials and Structures journal," Vol. 15, pp. 1103-1109 (2006).

[J73] D. Kim and K. J. Kim, "Experimental Investigation on Electrochemical Properties of Ionic Polymer-Metal Composite," Journal of Intelligent Materials Systems and Structures (JIMSS), Vol. 17, pp. 449-454 (2006).

[J72] S. Lee, K. J. Kim, and H. C. Park, "An IPMC Actuator-Driven Zero-Net-Mass-Flux Pump for Flow Control," Journal of Intelligent Materials Systems and Structures (JIMSS), Vol. 17, pp. 533-541 (2006).

[J71] S. Vemuri and K. J. Kim, "A Theoretical Approach to Dropwise Condensation Using Self-Assembled Monolayers," International Journal of Heat and Mass Transfer, Vol. 49(3-4), pp. 649-657 (2006). 

[J70] K. Choe and K. J. Kim, "Polyacrylonitrile Linear Actuators: Chemomechanical and Electro-Chemomechanical Properties," Sensors and Actuators A, Vol. 126, pp. 165-172 (2006).

[J69] S. Vemuri, K. J. Kim, B. D. Wood, S. Govindaraju, and T. W. Bell, "Long Term Testing for Dropwise Condensation Using Self-Assembled Monolayer Coatings of n-Octadecyl Mercaptan," Applied Thermal Engineering, Vol. 26, No. 4, pp. 421-429 (2006). 

2001-2005

[J68] D. Y. Lee, M.-H. Lee, K. J. Kim, S. Heo, B.-Y. Kim, S.-J. Lee, "Effect of Multiwalled Carbon Nanotube (M-CNT) Loading on M-CNT Distribution Behavior and the Related Electromechancial Properties of the M-CNT Dispersed Ionomeric Nanocomposites," Surface Coatings and Technology, Vol. 200(5-6), pp. 1916-192 (2005).

[J67] S-K. Lee, H. C. Park, K. J. Kim, K. J. Yoon, "Equivalent Modeling for Ionic Polymer-Metal Composite Actuators Based on Beam Theories," Smart Materials and Structures, Vol. 14, pp. 1363-1368 (2005).

[J66] J. W. Paquette, K. J. Kim, D. Kim, and W. Yim, "The Behavior of Ionic Polymer-Metal Composites in a Multi-Layer Configuration," Smart Materials and Structures , Vol. 14, 881-888 (2005).

[J65] H. C. Park, S.-K. Lee, and K. J. Kim, "Equivalent Modeling for Shape Design of IPMC (Ionic Polymer-Metal Composite) as Flapping Actuator," Key Engineering Materials: Advances in Fracture and Strength, Vol. 297-300, pp. 616-621 (2005).

[J64] S. Vemuri, K. J. Kim, A. Razani, T. W. Bell, B. Wood, “Cost Effective Techniques for Enhancing Heat Transfer Rate in Steam Condensation,” AIAA-Journal of Thermophysics and Heat Transfer, Vol. 19, No. 1, pp. 101-105 (2005).

[J63] S. Vemuri and K. J. Kim, “Pool Boiling of Saturated FC-72 on Nano-Porous Surface,” International Communications in Heat and Mass Transfer, Vol. 32, pp. 27-31 (2005).

[J62] M. Shahinpoor and K. J. Kim, “Ionic Polymer-Metal Composite-IV: Industrial and Mechanical Applications,” Smart Materials and Structures, Vol. 14, 197-214 (2005).

[J61] J.-D. Nam, H. R. Choi, J. H. Lee, S. D. Hwang, K. J. Kim, and H. Seo, “Electrostrictive Polymer Nanocomposites Exhibiting Tunable Electrical Properties, Smart Materials and Structures, Vol. 14, pp. 87-90 (2005).

[J60] J.-D. Nam, J. H. Lee, J. H. Lee, H. Choe, K. J. Kim, and Y. S. Tak, “Water Uptake and Migration Effects of Electroactive IPMC(Ion-exchange Polymer Metal Composite) Actuator,” Sensors and Actuators A: Physical, Vol. 118, pp. 98-106 (2005).

[J59] J. W. Paquette, K. J. Kim, and D. Kim, “Low Temperature Characteristics of Ionic Polymer-Metal Composite Actuators,” Sensors and Actuators A: Physical, Vol. 118, pp. 135-143 (2005).

[J58] D. Y. Lee, S. Heo, K. J. Kim, D. Y. Kim, and M.-H. Lee, “Preparation of Multiwalled Carbon Nanotube (MWNT)-Nafion Composites as Actuator,” Key Engineering Materials, Vol. 284-286, pp. 733-736 (2005).

[J57]S.-K Lee, H.-C. Park, K. J. Kim and K-J. Yoon, "Equivalent Beam and Equivalent Bimorph Beam Models for Ionic Polymer-Metal Composite Actuators," Journal of Control, Automation, and Systems Engineering , Vol. 10(11), pp. 1012-1016 (in Korean, 2004).

[J56] S. Heo, K. J. Kim, and J. W. Paquette, "A Review : Underwater Applications of Ionic Polymer –Metal Composites," Journal of Control, Automation, and Systems Engineering (in Korean, in print 2004). 

[J55] M. Shahinpoor and K. J. Kim, “Ionic Polymer-Metal Composites: III. Modeling and Simulation as Biomimetic Sensors, Actuators, Transducers, and Artificial Muscles,” (Review Paper) Smart Materials and Structures, Vol. 13, pp. 1362-1388 (2004).

[J54] J. Paquette and K. J. Kim, “Ionomeric Electro-Active Polymer Artificial Muscle for Naval Applications,” IEEE Journal of Oceanic Engineering (JOE), Vol. 29, No. 3, pp. 729-737 (2004).

[J53] C.-H. Je and K. J. Kim, “Cellophane as a Biodegradable Electroactive Polymer Actuator,” Sensors and Actuators A: Physical, Vol. 112, No. 1, pp. 107-115 (2004).

[J52] K. J. Kim, “Fabrication and Development of Electroactive Ionic Polymer-Metal Composites and Their Applications as Smart Materials”  Materials Science Forum (MSF), Vol. 426-432, pp. 2249-2254 (2003).

[J51] J. Paquette, K. J. Kim, J.-D. Nam, and Y. S. Tak, “An Equivalent Circuit Model for Ionic Polymer-Metal Composites and Their Performance Improvement by a Clay-Based Polymer Nano-Composite Technique,” Journal of Intelligent Materials Systems and Structures (JIMSS), Vol. 14, pp. 633-642 (2003).

[J50] C.-H. Je and K. J. Kim, “Predicting the Environmental Pollution from Bottom Contaminated Sediments Induced by Hydraulic Cutterhead Dredge,” International Journal of Environmentally Conscious Design and Manufacturing (IJECDM), Vol. 11, No. 3, pp. 1-9 (2003).

[J49] J.-D. Nam, H. R. Choi, Y. S. Tak, and K. J. Kim, “Novel Electroactive, Silicate Nanocomposites Prepared to be Used as Actuators and Artificial Muscles,” Sensors and Actuators: A. Physical, Vol. 105, pp. 83-90 (2003).

[J48] K. J. Kim and M. Shahinpoor, “Ionic Polymer-Metal Composites - II. Manufacturing Techniques," (Review Paper), Smart Materials and Structures, Vol. 12, No. 1, pp. 65-79 (2003).

[J47] G. Llyod, K. J. Kim, A. Razani, and M. Shahinpoor, “Investigation of a Solar-Thermal Bio-mimetic Metal Hydride Actuator,” ASME Transactions - Journal of Solar Energy Engineering (JSEE), Vol. 125, pp. 95-100 (2003).

[J46] M. Shahinpoor, K. J. Kim, and D. Leo, “Ionic Polymer-Metal Composites as Multifunctional Materials,” Polymer Composites, Vol. 24, No. 1, pp. 24-33 (2003).

[J45] K. J. Kim and M. Shahinpoor, “Effective Diffusivity of Nanoscale Ion-Water Clusters within Ion-Exchange Membranes Determined by a Novel Mechano-Electric Technique, International Journal of Hydrogen Energy, Vol. 28, No. 1, pp. 85-90 (2003).

[J44] M. Shahinpoor and K. J. Kim, “Experimental Study of Ionic Polymer-Metal Composites in Various Cation Forms: Actuation Behavior,” Science and Engineering of Composite Materials, Vol. 10, No. 6, pp. 423-436 (2002).

[J43] M. Shahinpoor and K. J. Kim, “Mass Transfer Induced Hydraulic Actuation in Ionic Polymer-Metal Composites,” Journal of Intelligent Materials Systems and Structures (JIMSS), Vol. 13, No. 6, pp. 369-376 (2002).

[J42] G. M. Lloyd, A. Razani, and K. J. Kim, “The Influence of Source Terms on a Gradient-Based Curvilinear Grid Scheme Applied to a Reacting Flow,” International Journal of Heat and Fluid Flow, Vol. 23, pp. 317-329 (2002).

[J41] J. C. Kim, H. J. Kim, D. G. Yoo, C. J. Jung, J.-D. Kim, Y. K. Kim, and K. J. Kim, “Morphological Behavior of oxy-PAN Fiber Upon pH Variation,” Polymer Korea (in Korean), Vol. 26, No. 4, pp. 492-500 (2002).

[J40] S. W. Kim, K. S. Lee, I. H. Cho, J. H. Lee, J. W. Lee, Y. K. Lee, K. J. Kim and J. D. Nam, “A Study on Elongation/Contraction Behavior and Mechanical Properties on Oxy-Polyacrylonitrile (PAN) Fiber in Basic/Acidic Solution, Polymer Korea (in Korean), Vol. 26, No. 4, pp. 468-476 (2002).

[J39] M. Shahinpoor and K. J. Kim, “Solid-state Soft Actuator Exhibiting Large Electromechanical Effect,” Applied Physics Letter (APL), Vol. 80(18), pp. 3445-3447 (2002).

[J38] M. Shahinpoor and K. J. Kim, “A Novel Physically-Loaded and Interlocked Electrode Developed for Ionic Polymer-Metal Composites (IPMCs),” Sensors and Actuator: A. Physical, Vol. 96, No. 2/3, pp. 125-132 (2002).

[J37] K. J. Kim and M. Shahinpoor, “Development of Three Dimensional Ionic Polymer-Metal Composites as Artificial Muscles,” Polymer, Vol. 43(3), pp. 797-802 (2002).

[J36] I. O. Marrero, A. M. Lefsaker, A. Razani, and K. J. Kim, “Second Law Analysis and Optimization of a Combined Triple Power Cycle,” Energy Conversion and Management, Vol. 43, pp. 557-573 (2002).

[J35] A. Stone, J. W. Paquette, K. J. Kim, and A. Razani, “Enhanced Steam Condensation as a Result of Heat Transfer Additives,” International Journal of Environmentally Conscious Design and Manufacturing (IJECDM), Vol. 10, No. 4, pp. 1-8 (2001).

[J34] A. Razani, J. W. Paquette, B. Montoya, and K. J. Kim, “A Thermal Model for Calculation of Heat Transfer Enhancement by Porous Metal Inserts,” Enhanced Heat Transfer, Vol. 8, No. 6, pp. 411-418 (2001).

[J33] M. Shahinpoor and K. J. Kim, “Ionic Polymer-Metal Composites – I. Fundamentals,” (Review Paper) Smart Materials and Structures, Vol. 10, pp. 819-833 (2001).

[J32] K. J. Kim, A. M. Lefsaker, A. Razani, and A. Stone, “The Effective Use of Heat Transfer Additives for Steam Condensation,” Applied Thermal Engineering, Vol. 21, No. 18, pp. 1863-1874 (2001).

[J31] G. Lloyd, A. Razani, and K. J. Kim, “Formulation and Numerical Solution of Non-local Thermal Equilibrium Equations for Multiple Gas/Solid Porous Metal Hydride Reactors,” Journal of Heat Transfer, Vol. 123, No. 3, pp. 520-526 (2001).

[J30] K. J. Kim, B. Montoya, A. Razani, and K.-H. Lee, “Metal Hydride Compacts of Improved Thermal Conductivity,” International Journal of Hydrogen Energy, Vol. 26, No. 6, pp. 609-613 (2001).

1996-2000

[J29] H. B. Schreyer, N. Gebhart, K. J. Kim, and M. Shahinpoor, “Electric Activation of Artificial Muscles Containing Polyacrylonitrile Gel Fibers,” Biomacromolecules, Vol. 1, No. 4, pp. 642-647 (2000).

[J28] M. Shahinpoor and K. J. Kim, “The Effect of Surface-Electrode Resistance on the Performance of Ionic Polymer-Metal Composite (IPMC) Artificial Muscles,” Smart Materials and Structures, Vol. 9, No. 4, pp. 543-551 (2000).

[J27] P. G. de Gennes, K. Okumura, M. Shahinpoor, and K. J. Kim, “Mechanoelectric Effects in Ionic Gels,” Europhysics Letters, Vol. 50, No. 4, pp. 513-518 (2000).

[J26] A. Razani, K. J. Kim, and K. T. Feldman, Jr., “Thermal Design of an Efficient Compressor Driven Absorption Heat Pump,” International Journal of Environmentally Conscious Design and Manufacturing (IJECDM), Vol. 9, No. 3, pp. 49-58 (2000).

[J25] G. Lloyd, A. Razani, and K. J. Kim, “Performance Characteristics of a Compressor-driven Metal Hydride Refrigerator,” ASME Transactions: Journal of Energy Resources Technology (JERT), Vol. 20, No. 4, pp. 305-313 (1998).

[J24] K. J. Kim, A. Razani, and M. Shahinpoor, “Solid Polymer Fuel Cells for the Next Century,” (Review Paper), International Journal of Environmentally Conscious Design and Manufacturing, Vol. 7, No. 3, pp. 17-46 (1998).

[J23] K. J. Kim, G. Lloyd, A. Razani, and K. T. Feldman, Jr., “Development of LaNi5/Cu/Sn Metal Hydride Powder Composites,” Powder Technology, Vol. 99, pp. 40-45 (1998).

[J22] K. J. Kim, G. Lloyd, K. T. Feldman, Jr., and A. Razani, “Thermal Analysis of the Ca0.4Mm0.6Ni5 Metal-Hydride Reactor,” Applied Thermal Engineering, Vol. 18, No. 12, pp. 1325-1336 (1998).

[J21] K. J. Kim, K. T. Feldman, Jr., G. M. Lloyd, A. Razani, and K. Shanahan, “Performance of High Power Metal Hydride Reactors,” International Journal of Hydrogen Energy, Vol. 23, No. 5, pp. 355-362 (1998).

[J20] G. Lloyd, K. J. Kim, A. Razani, and K. T. Feldman, Jr., “Thermal Conductivity of Porous Metal Hydrides,” AIAA: Journal of Thermophysics and Heat Transfer, Vol. 12, No. 2, pp. 132-137 (1998).

[J19] K. T. Feldman, Jr., C. Jensen, K. J. Kim, and A. Razani, “A New Absorption Heat Pumps,” ASHRAE Transactions, Vol. 104, Pt. 1, pp. 1427-1433 (1998).

[J18] K. J. Kim, K. T. Feldman, Jr., G. Lloyd, and A. Razani, “Compressor-Driven Heat Pump Development Employing Porous Metal Hydride Compacts,” ASHRAE Transactions, Vol. 104, Pt. 1, pp. 1434-1445 (1998).

[J17] K. J. Kim, K. T. Feldman, Jr., G. Lloyd, and A. Razani, “Absorption of Hydrogen in LaNi4.75Al0.25/N-Octane Slurries,” Industrial & Engineering Chemistry Research (I&ECR), Vol. 36, No. 9, pp. 3920-3926 (1997).

[J16] T. A. Ameel, K. J. Kim, and B. D. Wood, “Measurement of Small Concentrations of Gases in a Low Pressure Water Vapor Mixture,” AIAA: Journal of Thermophysics and Heat Transfer, Vol. 11, No. 4, pp. 582-584 (1997).

[J15] T. A. Ameel, K. J. Kim, and B. D. Wood, “Non-absorbable Gas Effects on Heat and Mass Transfer in Wavy Laminar Film Absorption,” Solar Energy, Vol. 60, No. 6, pp. 301-311 (1997).

[J14] K. J. Kim, K. T. Feldman, Jr., and A. Razani, “Heat-driven Hydride Slurry Heat Pumps,” International Journal of Refrigeration, Vol. 20, No. 5, pp. 339-351 (1997).

[J13] K. J. Kim, K. T. Feldman, Jr., and A. Razani, “Cooling Power and Efficiency Diagram for Compressor-driven Metal Hydride Slurry Air-conditioners,” Energy, Vol. 22, No. 8, pp. 787-796 (1997).

[J12] K. J. Kim, K. T. Feldman, Jr., G. Lloyd, and A. Razani, “Compressor Driven Metal Hydride Heat Pumps,” Applied Thermal Engineering, Vol. 17, No. 6, pp. 551-560 (1997).

[J11] K. J. Kim, T. A. Ameel, and B. D. Wood, “Performance Evaluations of LiCl and LiBr for Absorber Design Applications in the Open Cycle Absorption Refrigeration System,” ASME Transactions: Journal of Solar Energy Engineering (JSEE), Vol. 119, No. 2, pp. 165-173 (1997).

[J10] G. M. Lloyd, A. Razani, K. J. Kim, K. T. Feldman, Jr., and T. R. Way, “Cooling Power/Efficiency Diagram for a Compressor Driven Metal Hydride Refrigeration System,” ASHRAE Transactions, Vol. 103, Pt. 1, PH-97-1-3 (1997).

[J9] K. J. Kim, T. R. Way, K. T. Feldman Jr., and A. Razani, “Solubility of Hydrogen in Octane, 1-Octanol, and Squalane,” Journal of Chemical Engineering Data, Vol. 42, No. 1, pp. 214-215 (1997).

[J8] K. J. Kim, N. S. Berman, and B. D. Wood, “The Interfacial Turbulence in Falling Film Absorption: Effect of Additives,” International Journal of Refrigeration, Vol. 19, No. 5, pp. 322-330 (1996).

[J7] J. Chen, K. J. Kim, and K. E. Herold, “Performance Enhancement of a Diffusion-Absorption Refrigerator,” International Journal of Refrigeration, Vol. 19, No. 3, pp. 208-218 (1996).

[J6] K. J. Kim, N. S. Berman, and B. D. Wood, “Effect of 2-Ethyl-1-Hexanol on the Absorption of Water Vapor into Lithium Bromide Solutions,” AICHE Journal, Vol. 42, No. 3, pp. 884-888 (1996).

1993-1995

[J5] K. J. Kim, N. S. Berman, D. S. C. Chau, and B. D. Wood, “Absorption of Water Vapor into Falling Films of Aqueous Lithium-Bromide,” International Journal of Refrigeration, Vol. 7, No. 7, pp. 486-494 (1995).

[J4] K. J. Kim, Z. Shi, J. Chen, and K. E. Herold, “Hotel Room Air-conditioner Design Based on the Diffusion-Absorption Cycle,” ASHRAE Transactions, Vol. 101, Pt. 1, pp. 1290-1301 (1995).

[J3] K. J. Kim and V. P. Janule, “Dynamic Surface Tension of Aqueous Lithium Bromide with 2-Ethyl-1-Hexanol,” International Communications in Heat and Mass Transfer, Vol. 21, No. 6, pp. 839-848 (1994).

[J2] K. J. Kim, N. S. Berman, and B. D. Wood, “Surface Tension of Aqueous Lithium-Bromide with 2-Ethyl-1-Hexanol,” Journal of Chemical Engineering Data, Vol. 39, pp. 122-124 (1994)

[J1] D. S. C. Chau, B. D. Wood, N. S. Berman, and K. J. Kim, “Solubility of Oxygen in Aqueous Lithium Bromide Using Electrochemical Technique,” International Communications in Heat and Mass Transfer, Vol. 20, pp. 643-652 (1993).